Sper-scientific 800007 Thermometer 2 Channel Type K/J Manual do Utilizador descarregar pdf (Página 6)

6

1. The max value is updated only when

exceeded.

2. With the meter on, press the MAX/MIN

button once. “MAX” and the maximum

(peak) temperature appear on the LCD.

3. The min value is updated only when a

lower temperature is recorded.

4. Press the MAX/MIN button again.

“MIN” and the minimum temperature

appear on the LCD.

5. Press the MAX/MIN button again. “AVG” and

the average temperature appear on the LCD.

6. The max/min/ave temperatures are held in

memory until the meter is turned off.

7. To exit this mode, press and hold the

MAX/MIN button for at least 2 seconds.

The current temperature appears on the LCD.

Note…

The primary display shows current channel

readings of min/max/ave. The lower display

shows current channel readings of actual

temperature. For model 800007, to view

another channel reading of min/max/ave,

press and hold the T1-T2 button to switch

from T1 to T2 and vice versa.

MEASUREMENT PROCEDURES

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários