Sper-scientific 850023 Anemometer SD Card Logger Manual do Utilizador

1 Anemometer SD Card Datalogger 850023 Instruction Manual

10 KEYPAD LCD Display POWER (ESC, Backlight) SET (▼, TIME CHECK) LOGGER (▲, SAMPLING TIME CHECK) HOLD/NEXT/FUNCTION REC/ENTER/UNIT

11 SETUP MODE The advanced Setup Mode allows you to customize the following meter preferences and defaults: • Real Time Clock • Decimal Type • Aut

12 SETUP MODE Note Press ESC to exit Setup Mode. The meter will return to Normal Mode. Real Time Clock 1. Enter the clock function from Setup Mo

13 SETUP MODE 2. Press ▲ or ▼ to select Basic (.) or Euro (,). Press ENTER to save the selection. Auto Power Off The meter automatically turns of

14 SETUP MODE (see page 11). “t-CF” appears on the LCD. 2. Press ▲ or ▼ to select C (degrees Celcius) or F (degrees Farhenheit). Press ENTER to s

15 MEASUREMENT PROCEDURES Turning the Unit On/Off 1. Press POWER to turn the meter on. 2. Press and hold POWER for 2 seconds to turn the meter of

16 MEASUREMENT PROCEDURES Air Velocity and Air Temperature 1. Press POWER to turn the meter on. 2. Plug the anemometer probe plug into the anemom

17 MEASUREMENT PROCEDURES 5. “K” or “J” appear on the LCD to indicate the type of thermometer. Note When using the meter for the first time, the m

18 MEASUREMENT PROCEDURES 5. To exit the min/max function, press and hold REC for 2 seconds or longer. The meter will return to Normal Mode. Note

19 DATALOGGER Preparing the Datalogger 1. Insert the SD card into the SD card socket on the bottom of the meter, ensuring that the front of t

2 Anemometer SD Card Datalogger 850023 Copyright ©2010 by Sper Scientific ALL RIGHTS RESERVED Printed in the USA 7720 E. Redfield Rd. S

20 DATALOGGER Note To enable/disable the touch-tone feature, see page 13. Manual Datalogging 1. Set the sampling time to 0 seconds. Refer to pag

21 DATALOGGER 2. If the datalogger is being used for the first time, a new file AMA01001.XLS will be generated under the route AMA01\. After exitin

22 BATTERY REPLACEMENT This meter uses six AA (1.5 V, UM3) batteries. When the low battery indicator appears on the LCD, battery repla

23 PC CONNECTION To save data from the SD card to a PC (using Excel software): 1. After datalogging is complete, remove the SD card from the me

24 PC CONNECTION Excel Data Screen RS232 PC Serial Interface This meter has a RS232 PC serial interface via a 3.5 mm terminal. The data o

25 The 16 digit data stream will display in the following format: D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Each digit indicates the fol

26 PC CONNECTION RS232 Format: 9600, N, 8, 1 D11 & D12 Annunciator for Display °C = 01 Knot = 09 mile/h = 12 °F = 02 Km/h = 10 m/S

27 OPTIONAL ACCESSORIES 800060~77 Type K Thermocouple Probes 840057 RS232 Computer Cable 840059 2GB SD Card 840090 Water Resistant

28 SPECIFICATIONS General Circuit Custom one-chip of microprocessor LSI circuit Display LCD size: 52 mm x 38 mm Backlight function Measurement Unit

29 SPECIFICATIONS Operating Humidity < 85% RH Alkaline or heavy duty DC 1.5 V battery (UM3, AA) x 6 pieces DC 9V adapter input (AC/DC power adap

3 TABLE OF CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . .

30 Air Velocity Air Temperature Range 0 ~ 50°C (32 ~ 122°F) Resolution Accuracy ± 0.8°C (± 1.5°F) 0.1°C (0.1°F) Measurement Range Resolution Accu

31 Type K/J Thermometer SPECIFICATIONS Sensor Type Range Resolution Accuracy -50.0 ~ 1300.0°C -50.1 ~ -100.0°C 0.1°C ± (0.4% readin

32 WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of five (5) years from the date of purch

4 INTRODUCTION The Sper Scientific Anemometer SD Card Datalogger (Model 850023) is an extremely accurate meter with fast response times that reads ai

5 • Reads air velocity and temperature and functions as a Type K/J thermometer • Low-friction ball vane wheels provide high accuracy in high and low

6 MATERIALS SUPPLIED • Meter • Probe • SD Card • 6 AA Batteries • Instruction Manual • Soft Carrying Case

7 POWER SUPPLY This meter can be powered by six AA (1.5 V, UM3) batteries or an optional 9 Volt DC adapter. See page 22 for battery repla

8 METER COMPONENTS Anemometer Probe Input Socket SD Card Socket RESET Type K/J Thermometer Socket Top of Meter Bottom of Meter Side of

9 METER COMPONENTS Tripod Mounting Screw Battery Cover Screws Battery Compartment/ Cover Stand Back of Meter Probe Head Probe Handle Probe Plug P